South East
Render Cleaning in Kent
Soft-wash render cleaning and biocide treatment that removes algae without damaging the finish.
If you are weighing up render cleaning in Kent, the starting point is what your walls are actually built from.
Most of what we see around Kent reflects the wider Kent pattern — ragstone and flint cottages, oast houses, Victorian terraces and coastal housing, and coastal weathering at Margate and Dover, lime work on ragstone. The area sees drier than average inland, exposed on the coast, which is the single biggest factor in how long any render lasts here.
Local factor. Kentish ragstone is porous and traditionally lime-rendered, while the north kent coast takes some of the most persistent easterly exposure in the south east.
Is render cleaning right for a Kent property?
Choose soft-wash cleaning to restore a discoloured render without the substrate damage that pressure washing causes on thin-coat systems.
That decision gets made at the survey, not on the phone. We will tell you plainly if a different system would serve the building better — including when a cheaper one would.
Guide price and specification
| Guide price | £12–£26 per m² |
|---|---|
| Applied thickness | Surface treatment |
| Curing / drying | Same day |
| Guarantee | 12 month treatment |
| Coverage | All of Kent — 10 towns and cities |
Indicative only, excluding scaffold, stripping and repairs. Try the guide-price tool for a range based on your property.
What is included
- Low-pressure soft wash
- Biocide treatment kills spores
- Safe on silicone and acrylic
- No high-pressure damage
- Removes algae, lichen and moss
- Treats staining and streaking
- Gutter and downpipe check
- Restores original colour
Render Cleaning across Kent
Render Cleaning in Kent
Tell us about the property and we will call you back to arrange a survey.
Other services in Kent
What happens next
Four steps from enquiry to finished wall
Free survey
We visit, test the substrate, measure up and identify what caused any existing failure.
Written quote
An itemised fixed price with the system named, materials specified and scaffold included.
Booked in
An agreed start date, scaffold arranged, and a clear run of days set aside for your job.
Finished and guaranteed
Site cleared, scaffold struck, guarantee documents and system warranty issued.
FAQs
Render Cleaning in Kent — questions
Can you render over existing render?
Sometimes, if the existing coat is completely sound and well-bonded. We hammer-test it first. Anything hollow has to come off, because covering failure just hides it.
Are you insured?
Yes — full public liability cover, and we can send the certificate before we start. We are happy to provide RAMS for commercial and contractor work.
What areas do you cover?
We work UK-wide, with teams across England, Scotland, Wales and Northern Ireland. If we are not the right firm for your location we will tell you rather than waste your time.
Can I pressure wash my render?
We strongly advise against it on thin-coat silicone, acrylic and monocouche. High pressure erodes the finish and forces water behind it. Soft washing is the safe method.
Will cleaning restore the original colour?
On through-coloured render, usually yes — the colour is intact under the growth. On painted render, cleaning may reveal that the paint itself has faded unevenly.
How much does rendering cost?
It is priced by the square metre and depends on the system, the condition of the walls and access. Our guide-price tool gives an indicative range in about a minute, and the survey turns that into a fixed written quote.
Render Cleaning quotes across Kent
Free survey, honest advice on whether this is the right system, and a fixed written price.