HOUSESRENDERINGRender · Protect · Enhance

Modern render systems

Acrylic Render

Tough, flexible acrylic thin-coat render with excellent colour retention and impact resistance.

Acrylic render uses an acrylic polymer binder rather than silicone or mineral cement. The result is a noticeably tougher, more flexible film — it takes knocks well and holds its colour under UV, which makes it a sensible pick for ground-floor elevations, communal areas and anywhere the wall gets handled.

The trade-off is breathability. Acrylic is less vapour-permeable than silicone or mineral render, so it is not the right choice on a solid-wall or lime-built property where moisture needs a route out. On cavity-wall construction, insulated systems and board substrates, where the wall does not rely on evaporating through the render, that lower permeability is a non-issue and you get the durability benefit for free.

When it is the right choice. Choose acrylic where impact resistance and colour retention matter more than maximum breathability — cavity walls, boards and EWI rather than solid stone.

Specification at a glance

Typical guide price£70–£98 per m² supplied and installed
Applied thickness1.5mm or 2mm over a 6mm basecoat
Curing / drying24 hours per coat
Guarantee20 years
CategoryModern render systems

Guide prices are indicative only and exclude scaffold, stripping and repairs. Your written quote follows a free survey.

What is included

  • High impact resistance
  • Excellent colour retention
  • Flexible — resists hairline cracking
  • Fast-drying topcoat
  • Strong adhesion to boards
  • Wide colour palette
  • Good on high-traffic elevations
  • Works over EWI and carrier boards
  • Low water absorption
  • 20-year system warranty

Get a quote for acrylic render

Tell us about the property and we will call you back to arrange a survey.

Free survey · no obligation · fixed written quote

Guaranteed workmanship
Free written survey
System-warranted builds
UK-wide coverage
Fixed price, no surprises

What happens next

Four steps from enquiry to finished wall

Free survey

We visit, test the substrate, measure up and identify what caused any existing failure.

Written quote

An itemised fixed price with the system named, materials specified and scaffold included.

Booked in

An agreed start date, scaffold arranged, and a clear run of days set aside for your job.

Finished and guaranteed

Site cleared, scaffold struck, guarantee documents and system warranty issued.

FAQs

Acrylic Render — your questions

Is acrylic render better than silicone?

Neither is universally better. Acrylic is tougher and holds colour slightly better; silicone is more breathable and self-cleaning. Substrate type usually decides it.

Can acrylic render be used on old solid walls?

We generally advise against it. Solid walls need to breathe, and acrylic's lower vapour permeability can trap moisture. Silicone or lime is the better route there.

Does acrylic render fade?

Very little. Acrylic binders are UV-stable and hold pigment well — fading is normally only noticeable on very deep or bright colours after many years.

How thick is acrylic render?

The decorative topcoat is 1.5mm or 2mm depending on grain size, applied over a reinforced basecoat of around 6mm.

Can you match my existing render?

Usually, yes. We colour and texture match as closely as we can, though weathered render never matches a fresh batch exactly — we will be honest about how visible a patch will be.

How long does a rendering job take?

A typical three-bedroom semi is usually one to two weeks on site including scaffold, preparation, application and finishing. Weather, wall condition and the system chosen all move that.

Do I need planning permission to render my house?

Usually not on a standard house, but you will if the property is listed, in a conservation area, or if rendering would significantly change its appearance. We flag it at survey.

Thinking about acrylic render?

Book a free survey and we will confirm whether it is right for your walls before you commit.

Call Get a quote