Scotland
Acrylic Render in Angus
Tough, flexible acrylic thin-coat render with excellent colour retention and impact resistance.
Our acrylic render work in Angus starts with a free survey, because guessing at a render specification is how jobs go wrong.
Across Angus, sandstone terraces, fishing-town housing and rural cottages dominates, and harling and render repair on exposed sandstone is what we are called out to most often. The area sees cold easterly exposure with hard frosts, which is the single biggest factor in how long any render lasts here.
Local factor. Local sandstone weathers readily once its face is broken, which is why harling was traditionally applied as a sacrificial protective coat.
Is acrylic render right for a Angus property?
Choose acrylic where impact resistance and colour retention matter more than maximum breathability — cavity walls, boards and EWI rather than solid stone.
That decision gets made at the survey, not on the phone. We will tell you plainly if a different system would serve the building better — including when a cheaper one would.
Guide price and specification
| Guide price | £70–£98 per m² |
|---|---|
| Applied thickness | 1.5mm or 2mm over a 6mm basecoat |
| Curing / drying | 24 hours per coat |
| Guarantee | 20 years |
| Coverage | All of Angus — 8 towns and cities |
Indicative only, excluding scaffold, stripping and repairs. Try the guide-price tool for a range based on your property.
What is included
- High impact resistance
- Excellent colour retention
- Flexible — resists hairline cracking
- Fast-drying topcoat
- Strong adhesion to boards
- Wide colour palette
- Good on high-traffic elevations
- Works over EWI and carrier boards
Acrylic Render across Angus
Acrylic Render in Angus
Tell us about the property and we will call you back to arrange a survey.
What happens next
Four steps from enquiry to finished wall
Free survey
We visit, test the substrate, measure up and identify what caused any existing failure.
Written quote
An itemised fixed price with the system named, materials specified and scaffold included.
Booked in
An agreed start date, scaffold arranged, and a clear run of days set aside for your job.
Finished and guaranteed
Site cleared, scaffold struck, guarantee documents and system warranty issued.
FAQs
Acrylic Render in Angus — questions
Does acrylic render fade?
Very little. Acrylic binders are UV-stable and hold pigment well — fading is normally only noticeable on very deep or bright colours after many years.
How much does rendering cost?
It is priced by the square metre and depends on the system, the condition of the walls and access. Our guide-price tool gives an indicative range in about a minute, and the survey turns that into a fixed written quote.
Do you offer a guarantee?
Yes. Every job carries our workmanship guarantee, and where a full manufacturer-specified system is installed you also get the system warranty on top.
What time of year is best for rendering?
Spring through autumn is ideal. Render should not be applied in frost or in very hot direct sun, so winter work needs protection and settled conditions.
Can you render over existing render?
Sometimes, if the existing coat is completely sound and well-bonded. We hammer-test it first. Anything hollow has to come off, because covering failure just hides it.
Are you insured?
Yes — full public liability cover, and we can send the certificate before we start. We are happy to provide RAMS for commercial and contractor work.
Acrylic Render quotes across Angus
Free survey, honest advice on whether this is the right system, and a fixed written price.