Plymouth, Devon
Lime Render in Plymouth
Breathable hydraulic and hot-mixed lime render for period, listed and solid-wall properties.
If you are weighing up lime render in Plymouth, the starting point is what your walls are actually built from.
Most of what we see around Plymouth reflects the wider Devon pattern — cob and thatch, stone farmhouses and extensive coastal housing, and cement render on cob causing structural decay.
Local conditions bring high rainfall and exposed coastal conditions, and that has a direct bearing on which systems are worth specifying. Cob is unforgiving — it must be finished in lime, and cement rendering over cob is one of the most damaging things that can be done to a devon property.
When lime render is the right call. Choose lime for any pre-1919, listed, stone, cob or solid-wall property — and wherever a conservation officer is involved.
Guide price in Plymouth
| Guide price | £95–£150 per m² |
|---|---|
| Applied thickness | Three coats, 8-12mm each |
| Guarantee | 15 years |
Indicative only. The guide-price tool gives a range for your property; the survey gives the fixed price.
What the job includes
- Fully vapour permeable
- NHL 2, 3.5 and 5 specifications
- Hot-mixed lime available
- Suitable for listed buildings
- Haired coats for stone and lath
- Self-healing hairline cracks
If a cheaper specification would do the job, we will say so. If it would not, we will tell you why.
Also covering near Plymouth
Lime Render in Plymouth
Tell us about the property and we will call you back to arrange a survey.
What happens next
Four steps from enquiry to finished wall
Free survey
We visit, test the substrate, measure up and identify what caused any existing failure.
Written quote
An itemised fixed price with the system named, materials specified and scaffold included.
Booked in
An agreed start date, scaffold arranged, and a clear run of days set aside for your job.
Finished and guaranteed
Site cleared, scaffold struck, guarantee documents and system warranty issued.
FAQs
Lime Render in Plymouth
Is lime render suitable for listed buildings?
Yes, and it is usually required. We work to conservation specifications and can supply mix details and samples for listed building consent.
How long does a rendering job take?
A typical three-bedroom semi is usually one to two weeks on site including scaffold, preparation, application and finishing. Weather, wall condition and the system chosen all move that.
Do I need planning permission to render my house?
Usually not on a standard house, but you will if the property is listed, in a conservation area, or if rendering would significantly change its appearance. We flag it at survey.
Will you need scaffolding?
For anything above single storey, yes — it is safer and produces a better finish than working off ladders or towers. Scaffold is included and itemised in the quote.
How long before I can paint new render?
Through-coloured systems need no painting at all. Sand and cement should cure for around 28 days before masonry paint goes anywhere near it.
Free survey in Plymouth
We will confirm whether lime render suits your walls before quoting a price.