Bourton-on-the-Water, Gloucestershire
Damp-Proof Render in Bourton-on-the-Water
Specialist waterproof and salt-resistant render systems for damp-affected and below-ground walls.
We carry out damp-proof render across Bourton-on-the-Water and the surrounding Gloucestershire area throughout the year.
Most of what we see around Bourton-on-the-Water reflects the wider Gloucestershire pattern — Cotswold limestone, Regency terraces in Cheltenham and modern estate housing, and lime render on Cotswold stone and conservation-compliant specifications.
Bourton-on-the-Water sits in a part of the UK that gets moderate rainfall with wetter conditions on the Cotswold escarpment — worth factoring into any render decision. Cotswold limestone is soft and porous, and a large proportion of the county sits within conservation areas where cement render is simply not permitted.
When damp-proof render is the right call. Choose a damp-proof system after flooding, alongside DPC works, on below-ground walls, and wherever salt contamination is destroying normal plaster.
Guide price in Bourton-on-the-Water
| Guide price | £88–£145 per m² |
|---|---|
| Applied thickness | Two or three specified coats |
| Guarantee | 20 years |
Indicative only. The guide-price tool gives a range for your property; the survey gives the fixed price.
What the job includes
- Salt-inhibiting render systems
- Waterproof additives to spec
- Renovating plaster build-ups
- Works with injected DPC
- Below-ground tanking grades
- Resists hygroscopic salt damage
Every quote follows a free survey — no estimates over the phone, because we cannot see your walls from here.
Also covering near Bourton-on-the-Water
Damp-Proof Render in Bourton-on-the-Water
Tell us about the property and we will call you back to arrange a survey.
Other services in Bourton-on-the-Water
What happens next
Four steps from enquiry to finished wall
Free survey
We visit, test the substrate, measure up and identify what caused any existing failure.
Written quote
An itemised fixed price with the system named, materials specified and scaffold included.
Booked in
An agreed start date, scaffold arranged, and a clear run of days set aside for your job.
Finished and guaranteed
Site cleared, scaffold struck, guarantee documents and system warranty issued.
FAQs
Damp-Proof Render in Bourton-on-the-Water
How long does a rendering job take?
A typical three-bedroom semi is usually one to two weeks on site including scaffold, preparation, application and finishing. Weather, wall condition and the system chosen all move that.
Do I need planning permission to render my house?
Usually not on a standard house, but you will if the property is listed, in a conservation area, or if rendering would significantly change its appearance. We flag it at survey.
Will you need scaffolding?
For anything above single storey, yes — it is safer and produces a better finish than working off ladders or towers. Scaffold is included and itemised in the quote.
How long before I can paint new render?
Through-coloured systems need no painting at all. Sand and cement should cure for around 28 days before masonry paint goes anywhere near it.
Do you take a deposit?
For most domestic jobs we take a deposit to cover materials and scaffold, with the balance on completion. Terms are set out clearly in the written quote.
Free survey in Bourton-on-the-Water
We will confirm whether damp-proof render suits your walls before quoting a price.