Tandragee, Armagh
Chimney Rendering in Tandragee
Rendering, repointing and weatherproofing chimney stacks — the most exposed masonry on any house.
If you are weighing up chimney rendering in Tandragee, the starting point is what your walls are actually built from.
Armagh is characterised by brick and stone terraces, rural cottages and modern estates, with dash render repair and damp in solid-wall rural properties the recurring theme on the properties we survey.
With wet with moderate inland exposure, specification matters more in this part of the country than a national price list suggests. Rural solid-wall stock across the county needs breathable systems, while the towns are conventional dash-rendered brick and block.
When chimney rendering is the right call. Choose chimney rendering where a stack is spalling, the pointing has failed, or damp is showing in upstairs rooms near a chimney breast.
Guide price in Tandragee
| Guide price | £180–£340 per m² |
|---|---|
| Applied thickness | Two coats plus flaunching |
| Guarantee | 15 years |
Indicative only. The guide-price tool gives a range for your property; the survey gives the fixed price.
What the job includes
- Full stack render or repair
- Flaunching renewal
- Lead flashing check and repair
- Repointing where needed
- Pot and cowl replacement
- Weatherproof breathable systems
Every quote follows a free survey — no estimates over the phone, because we cannot see your walls from here.
Also covering near Tandragee
Chimney Rendering in Tandragee
Tell us about the property and we will call you back to arrange a survey.
What happens next
Four steps from enquiry to finished wall
Free survey
We visit, test the substrate, measure up and identify what caused any existing failure.
Written quote
An itemised fixed price with the system named, materials specified and scaffold included.
Booked in
An agreed start date, scaffold arranged, and a clear run of days set aside for your job.
Finished and guaranteed
Site cleared, scaffold struck, guarantee documents and system warranty issued.
FAQs
Chimney Rendering in Tandragee
Are you insured?
Yes — full public liability cover, and we can send the certificate before we start. We are happy to provide RAMS for commercial and contractor work.
What areas do you cover?
We work UK-wide, with teams across England, Scotland, Wales and Northern Ireland. If we are not the right firm for your location we will tell you rather than waste your time.
Why is my chimney causing damp?
Water enters through failed flaunching, cracked render, open pointing or defective flashings, then runs down inside the flue and shows as staining on a chimney breast, often on the floor below.
What is flaunching?
The mortar fillet that beds the chimney pots into the top of the stack and sheds water off it. It cracks and fails with age and is a very common leak point.
How much does rendering cost?
It is priced by the square metre and depends on the system, the condition of the walls and access. Our guide-price tool gives an indicative range in about a minute, and the survey turns that into a fixed written quote.
Free survey in Tandragee
We will confirm whether chimney rendering suits your walls before quoting a price.