Montrose, Angus
Chimney Rendering in Montrose
Rendering, repointing and weatherproofing chimney stacks — the most exposed masonry on any house.
Montrose property owners come to us for chimney rendering for one of two reasons: something has failed, or the house looks tired.
The prevailing picture in Angus is sandstone terraces, fishing-town housing and rural cottages. That means harling and render repair on exposed sandstone comes up more here than almost anywhere else.
Montrose sits in a part of the UK that gets cold easterly exposure with hard frosts — worth factoring into any render decision. Local sandstone weathers readily once its face is broken, which is why harling was traditionally applied as a sacrificial protective coat.
When chimney rendering is the right call. Choose chimney rendering where a stack is spalling, the pointing has failed, or damp is showing in upstairs rooms near a chimney breast.
Guide price in Montrose
| Guide price | £180–£340 per m² |
|---|---|
| Applied thickness | Two coats plus flaunching |
| Guarantee | 15 years |
Indicative only. The guide-price tool gives a range for your property; the survey gives the fixed price.
What the job includes
- Full stack render or repair
- Flaunching renewal
- Lead flashing check and repair
- Repointing where needed
- Pot and cowl replacement
- Weatherproof breathable systems
If a cheaper specification would do the job, we will say so. If it would not, we will tell you why.
Also covering near Montrose
Chimney Rendering in Montrose
Tell us about the property and we will call you back to arrange a survey.
What happens next
Four steps from enquiry to finished wall
Free survey
We visit, test the substrate, measure up and identify what caused any existing failure.
Written quote
An itemised fixed price with the system named, materials specified and scaffold included.
Booked in
An agreed start date, scaffold arranged, and a clear run of days set aside for your job.
Finished and guaranteed
Site cleared, scaffold struck, guarantee documents and system warranty issued.
FAQs
Chimney Rendering in Montrose
Are you insured?
Yes — full public liability cover, and we can send the certificate before we start. We are happy to provide RAMS for commercial and contractor work.
What areas do you cover?
We work UK-wide, with teams across England, Scotland, Wales and Northern Ireland. If we are not the right firm for your location we will tell you rather than waste your time.
Why is my chimney causing damp?
Water enters through failed flaunching, cracked render, open pointing or defective flashings, then runs down inside the flue and shows as staining on a chimney breast, often on the floor below.
What is flaunching?
The mortar fillet that beds the chimney pots into the top of the stack and sheds water off it. It cracks and fails with age and is a very common leak point.
How much does rendering cost?
It is priced by the square metre and depends on the system, the condition of the walls and access. Our guide-price tool gives an indicative range in about a minute, and the survey turns that into a fixed written quote.
Free survey in Montrose
We will confirm whether chimney rendering suits your walls before quoting a price.