Mold, Clwyd
Brick Slip Cladding in Mold
Brick slip systems giving an authentic brick face over insulation or an existing rendered wall.
If you are weighing up brick slip cladding in Mold, the starting point is what your walls are actually built from.
The prevailing picture in Clwyd is stone cottages, Victorian seaside terraces and postwar estates. That means driving rain and salt exposure on the coastal strip comes up more here than almost anywhere else.
Local conditions bring wet with strong exposure along the north Wales coast, and that has a direct bearing on which systems are worth specifying. The north wales coast takes sustained irish sea exposure, and roughcast has protected buildings here for generations for good reason.
When brick slip cladding is the right call. Choose brick slips where planning, conservation or street character require a brick face, or where you want brick detailing over an insulated wall.
Guide price in Mold
| Guide price | £150–£240 per m² |
|---|---|
| Applied thickness | Slip plus adhesive and backing |
| Guarantee | 25 years |
Indicative only. The guide-price tool gives a range for your property; the survey gives the fixed price.
What the job includes
- Genuine clay and concrete slips
- Mechanical and adhesive fixing
- Corner slips for authentic returns
- Full pointing to match brickwork
- Works over EWI systems
- Wide brick range and colour match
You get a written, itemised quotation after the survey, with the specification named so you can compare like for like.
Also covering near Mold
Brick Slip Cladding in Mold
Tell us about the property and we will call you back to arrange a survey.
What happens next
Four steps from enquiry to finished wall
Free survey
We visit, test the substrate, measure up and identify what caused any existing failure.
Written quote
An itemised fixed price with the system named, materials specified and scaffold included.
Booked in
An agreed start date, scaffold arranged, and a clear run of days set aside for your job.
Finished and guaranteed
Site cleared, scaffold struck, guarantee documents and system warranty issued.
FAQs
Brick Slip Cladding in Mold
Can you match my existing render?
Usually, yes. We colour and texture match as closely as we can, though weathered render never matches a fresh batch exactly — we will be honest about how visible a patch will be.
Can brick slips go over insulation?
Yes, that is one of their main uses. Purpose-made carrier systems fix over EWI boards and take the slips mechanically as well as adhesively.
Will brick slips fall off?
Not when installed on a proper carrier system with mechanical fixing as well as adhesive. Failures come from adhesive-only fixing onto unsuitable substrates.
How long does a rendering job take?
A typical three-bedroom semi is usually one to two weeks on site including scaffold, preparation, application and finishing. Weather, wall condition and the system chosen all move that.
Do I need planning permission to render my house?
Usually not on a standard house, but you will if the property is listed, in a conservation area, or if rendering would significantly change its appearance. We flag it at survey.
Free survey in Mold
We will confirm whether brick slip cladding suits your walls before quoting a price.