Shrewsbury, Shropshire
Acrylic Render in Shrewsbury
Tough, flexible acrylic thin-coat render with excellent colour retention and impact resistance.
We carry out acrylic render across Shrewsbury and the surrounding Shropshire area throughout the year.
Across Shropshire, timber framing, sandstone cottages and rural farm buildings dominates, and lime render on timber-frame and sandstone in a conservation-heavy county is what we are called out to most often.
The area sees moderate rainfall with exposed upland conditions in the south, which is the single biggest factor in how long any render lasts here. Ludlow and shrewsbury hold large concentrations of listed timber-framed buildings where only lime specifications will get consent.
When acrylic render is the right call. Choose acrylic where impact resistance and colour retention matter more than maximum breathability — cavity walls, boards and EWI rather than solid stone.
Guide price in Shrewsbury
| Guide price | £70–£98 per m² |
|---|---|
| Applied thickness | 1.5mm or 2mm over a 6mm basecoat |
| Guarantee | 20 years |
Indicative only. The guide-price tool gives a range for your property; the survey gives the fixed price.
What the job includes
- High impact resistance
- Excellent colour retention
- Flexible — resists hairline cracking
- Fast-drying topcoat
- Strong adhesion to boards
- Wide colour palette
Every quote follows a free survey — no estimates over the phone, because we cannot see your walls from here.
Also covering near Shrewsbury
Acrylic Render in Shrewsbury
Tell us about the property and we will call you back to arrange a survey.
What happens next
Four steps from enquiry to finished wall
Free survey
We visit, test the substrate, measure up and identify what caused any existing failure.
Written quote
An itemised fixed price with the system named, materials specified and scaffold included.
Booked in
An agreed start date, scaffold arranged, and a clear run of days set aside for your job.
Finished and guaranteed
Site cleared, scaffold struck, guarantee documents and system warranty issued.
FAQs
Acrylic Render in Shrewsbury
Can acrylic render be used on old solid walls?
We generally advise against it. Solid walls need to breathe, and acrylic's lower vapour permeability can trap moisture. Silicone or lime is the better route there.
How thick is acrylic render?
The decorative topcoat is 1.5mm or 2mm depending on grain size, applied over a reinforced basecoat of around 6mm.
How long does a rendering job take?
A typical three-bedroom semi is usually one to two weeks on site including scaffold, preparation, application and finishing. Weather, wall condition and the system chosen all move that.
Do I need planning permission to render my house?
Usually not on a standard house, but you will if the property is listed, in a conservation area, or if rendering would significantly change its appearance. We flag it at survey.
Will you need scaffolding?
For anything above single storey, yes — it is safer and produces a better finish than working off ladders or towers. Scaffold is included and itemised in the quote.
Free survey in Shrewsbury
We will confirm whether acrylic render suits your walls before quoting a price.