Cromer, Norfolk
Acrylic Render in Cromer
Tough, flexible acrylic thin-coat render with excellent colour retention and impact resistance.
Cromer property owners come to us for acrylic render for one of two reasons: something has failed, or the house looks tired.
Most of what we see around Cromer reflects the wider Norfolk pattern — flint and brick cottages, Norfolk carrstone, thatch and coastal housing, and lime render on flint and clunch, coastal exposure on the north Norfolk coast.
The area sees the driest county in England with cold easterly coastal exposure, which is the single biggest factor in how long any render lasts here. Flint walls need lime because the mortar does the work, not the stone — cement on flint causes the face to spall off in freezing weather.
When acrylic render is the right call. Choose acrylic where impact resistance and colour retention matter more than maximum breathability — cavity walls, boards and EWI rather than solid stone.
Guide price in Cromer
| Guide price | £70–£98 per m² |
|---|---|
| Applied thickness | 1.5mm or 2mm over a 6mm basecoat |
| Guarantee | 20 years |
Indicative only. The guide-price tool gives a range for your property; the survey gives the fixed price.
What the job includes
- High impact resistance
- Excellent colour retention
- Flexible — resists hairline cracking
- Fast-drying topcoat
- Strong adhesion to boards
- Wide colour palette
Every quote follows a free survey — no estimates over the phone, because we cannot see your walls from here.
Also covering near Cromer
Acrylic Render in Cromer
Tell us about the property and we will call you back to arrange a survey.
What happens next
Four steps from enquiry to finished wall
Free survey
We visit, test the substrate, measure up and identify what caused any existing failure.
Written quote
An itemised fixed price with the system named, materials specified and scaffold included.
Booked in
An agreed start date, scaffold arranged, and a clear run of days set aside for your job.
Finished and guaranteed
Site cleared, scaffold struck, guarantee documents and system warranty issued.
FAQs
Acrylic Render in Cromer
Can you match my existing render?
Usually, yes. We colour and texture match as closely as we can, though weathered render never matches a fresh batch exactly — we will be honest about how visible a patch will be.
Can acrylic render be used on old solid walls?
We generally advise against it. Solid walls need to breathe, and acrylic's lower vapour permeability can trap moisture. Silicone or lime is the better route there.
How thick is acrylic render?
The decorative topcoat is 1.5mm or 2mm depending on grain size, applied over a reinforced basecoat of around 6mm.
How long does a rendering job take?
A typical three-bedroom semi is usually one to two weeks on site including scaffold, preparation, application and finishing. Weather, wall condition and the system chosen all move that.
Do I need planning permission to render my house?
Usually not on a standard house, but you will if the property is listed, in a conservation area, or if rendering would significantly change its appearance. We flag it at survey.
Free survey in Cromer
We will confirm whether acrylic render suits your walls before quoting a price.